Initial Commissioning; Installing The Camera Bracket - Bosch SCT 17 Instrucciones De Servicio

tance display is red, the adjustment device is outside
the tolerance range. If the distance display is green, the
adjustment device is within the tolerance range.
(1) Input box for vehicle-specific distance
(2) Distance display
Centered alignment using the virtual line
(1)
A virtual line is used for aligning the adjustment de‐
vice centrally. The virtual line will be displayed in the
camera image in Bosch ADAS Positioning. The virtual
line must run through two central reference points on
the vehicle, for example the manufacturer's badge
on the front of the vehicle and the antenna on the roof
(3).
of the vehicle The zoom-in views will be displayed
if Detail view is enabled in the settings.
(1) Virtual line
(2) Zoom-in view of the manufacturer's badge
(3) Zoom-in view of the antenna
As soon as the adjustment device is positioned at the
vehicle-specific distance and the virtual line runs
through two central reference points of the vehicle, the
adjustment device will be centered in front of the vehi‐
cle. The correct calibration board and ESI[tronic] 2.0
can be used to calibrate the front camera system.
---Separator---
3.

Initial commissioning

3.1 ---Separator---

Installing the camera bracket

1. Remove the mount for large calibration boards (1).
2. Remove the arrestor cable for the P-Assist S5 (2).
Robert Bosch GmbH
1
(1) Mount for large calibration boards
(2) Arrestor cable for P-Assist S5
3. Position the camera bracket
such a way that the cylindrical pins of the L bracket
(3)
engage with the camera bracket.
4. Use the included screw
bracket on the L bracket.
1
2
(2)
1
(1) Camera bracket
(2) Included screw for camera bracket
(3) Cylindrical pins of L bracket
(1)
5. Use the clamp
(1) Clamp for camera bracket
6. Position the camera
such a way that the cylindrical pins of the camera
engage with the camera bracket.
7. Use the included screw
SCT 17 | 11 | en
2
(1)
on the L bracket in
(2)
to secure the camera
3 3
to secure the camera bracket.
1
(1)
on the camera bracket in
(3) to secure the camera (1).
1 689 989 391 | 2018-08-01