Product Description; Intended Use; Rscd 2100 Product Description; Laser Alignment Unit - Bosch RSCD 2100 Manual Original

Aparato de ajuste para sensores de radar
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
en |
22 | RSCD 2100 | Product description
4.

Product description

4.1

Intended use

The RSCD 2100 is to be used only for adjustment of
distance sensors (radar technology) on motor vehicles .
Any other or additional application does not constitute
the intended use.
4.2

RSCD 2100 product description

The RSCD 2100 together with its trolley may be used in
various measurement bays.
The main unit consists of a height-adjustable mirror
unit mounted on a trolley. A laser alignment unit can be
attached to the mirror unit to adjust parallelism. The
mirror unit needs to be tilted to three predefined posi-
tions during the test sequence.
Abb. 1: RSCD 2100
1. Mirror unit (ICC sensor target plate)
2. Mirror mount with tilting unit
3. Handle
4. Post with height scale
5. Positioning foot
6. Base plate with wheel modules
7. Base slide gauge with vertical release
|
1 690 386 085
2018-08-21
4.3

Laser alignment unit

The laser alignment unit is equipped with a battery-ope-
rated line laser and is used to ensure exact alignment of
the mirror unit to the manufacturer's specific reference
lines. See also sec. 6.2.
i
The standard laser alignment unit is part of the
scope of delivery (fig. 2).
The "Professional" laser alignment unit, which emits an
audible signal during operation, is available optionally.
To protect the battery, the voltage supply automatically
shuts off the laser after a few minutes.
Abb. 2:
"Standard" laser alignment unit
1 Laser mount
2 Laser module with on/off switch
Laser class 1
The exposed laser radiation is not hazar-
dous.
1
2
Robert Bosch GmbH
Tabla de contenido
loading

Tabla de contenido