Unpacking Your Saw - DeWalt DWS779 Manual De Instrucciones

FIG. 1
DW7080
LOCKNUTS
END PLATE
DW7053
DW7082
DW7084
Dust Bag: DW7053
Equipped with a zipper for easy emptying, the dust bag will capture the majority of the
sawdust produced.
Crown Molding Fence: DW7084
Used for precision cutting of crown molding.
SAW BLADES: ALWAYS USE 12" (305 mm) SAW BLADES WITH EITHER 1" (25.4 mm) OR
5/8" (15.88 mm) ARBOR HOLES. SPEED RATING MUST BE AT LEAST 4800 RPM. Never
use a smaller diameter blade. It will not be guarded properly. Use crosscut blades only!
Do not use blades designed for ripping, combination blades or blades with hook angles in
excess of 7°.
DW7051

Unpacking Your Saw

BRACKET
Check the contents of your miter saw carton to make sure that you have received all parts.
KNOBS
In addition to this instruction manual, the carton should contain:
Specifications
CAPACITY OF CUT
50º miter left, 60º miter right,
49º bevel left and right
Your saw is capable of cutting baseboard moldings held vertically 0.8" (20 mm) thick by 6.75"
(171 mm) tall on a 45º right or left miter, when using the slide lock lever (Fig. 7).
NOTE: Your saw is capable of cutting the following once a special setup procedure is
followed. Refer to Special Cuts.
4
BLADE DESCRIPTIONS
APPLICATION
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose
Fine Crosscuts
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts
Non-ferrous metals
NOTE: For cutting non-ferrous metals, use only saw blades with
TCG (Triple Chip Grind) teeth designed for this purpose.
1 DWS779 miter saw
1 D WALT 12" (305 mm) diameter saw blade
e
In bag:
1 Blade wrench
1 DW7053 dustbag
1 Material clamp
ANGLE MAXIMUM CAPACITY OF CUT
Height 4.4" (112 mm)
0° miter
Width 13.75" (349 mm)
Height 4.4" (112 mm)
45° miter
Width 9.6" (244 mm)
Height 3.1" (79 mm)
45º bevel – left
Width 13.75" (349 mm)
Height 2.2" (56 mm)
45º bevel – right
Width 13.75" (349 mm)
0° miter Height 1.5" (38 mm)
45º miter Height 1.5" (38 mm)
DIAMETER TEETH
12" (305 mm) 40
12" (305 mm) 60
12" (305 mm) 80
12" (305 mm) 96
RESULT
Width 9.1" (231 mm)
Height 3.0" (76 mm)
Width 5.8" (147 mm)
Height 3.0" (76 mm)
Width 11.4" (290 mm)
Height 1.7" (43 mm)
Width 11.4" (290 mm)
Height 1.1" (28 mm)
Width 16.1" (409 mm)
Width 11.7" (297 mm)