Hedson W10 Manual Del Usuario página 11

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
10.5.3 Work Hours/Intelligent
Heater
The W10 and W12 are equipped
with an intelligent
water heating system that saves
up to 50% more energy than a
traditional thermostat controlled
heater. Enter the time for when
the machine should be ready
for washing in the morning, the
time for when the machine is no
longer used in the afternoon and
which weekdays the schedule
should be active.
The machine will then
automatically start heating the
water in time so that it is at
desired temperature at the
"STARTTIME". The machine is
default set at 7:00-16:00,
MON-FRI. This means that the
water will be at operation
temperature between these hours.
If intelligent heating for some
reason isn't desired, set the time
schedule from 00:00-00:00,
MON-SUN and the heater will
keep the water warm 24 hours,
7 days a week.
10.5.4 Water temperature/
Heater
The water temperature is
adjustable between 30-50°C.
The heater can also be turned off
by decreasing temp until OFF is
shown in LCD.
The factory setting of the water
temperature is 45ºC. This value
may NOT be increased since the
water will be too hot and lead to
risk of burning injuries.
230312-EN rev.5 2016-09-21
W10 & W12
10.5.5 Time
It is important that time and
week day is correct since various
functions in the interface are
dependent on it.
10.5.6 Factory Reset
Use this to reset the machine to
factory standard.
If you accidentally entered the
menu, just press back or use the
STOP-button.
10.5.7 Version/Model
Shows what version of software
(SW) and hardware (HW) the
machine is using.
10.5.8 Self Test
The self test makes it possible to
run every function individually
in the machine. It is used i.e.
when new options are installed,
to control that they are working
properly. It can also be used for
troubleshooting the machine.
The self test should only be used
by authorized personnel.
10.5.9 Alarm Log
The alarm log saves all error
codes. The errors will be displayed
in the LCD when they occur. These
error codes are saved to an alarm
log where you can go back and
see type of error code, how many
days ago it occurred and the time.
See chapter 19 Trouble Shooting
for error code list.
11
Tabla de contenido
loading

Productos relacionados para Hedson W10

Este manual también es adecuado para:

W12

Tabla de contenido