Gliding Rack - Samsung NY36R9966P Serie Manual Del Usuario

Gliding rack

NY9900R_CHEF_NY36R9966PS_AA_DG68-01105B-00_EN+MES+CFR.indb 49
1. Remove the gliding rack from the oven.
2. Fully extend the gliding rack on a table.
It is a good idea to put newspaper
beneath the rack for later cleanup.
3. If the sliding tracks are contaminated,
remove impurities using a paper towel.
If the gliding rack has been sticking,
apply graphite lubricant according to
the instructions on the right.
To apply the graphite lubricant
1.
2.
3.
4.
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
CAUTION
• Do not leave racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the racks' coating and
make it difficult to remove the racks.
• Do not spray cooking oil or lubricant directly onto the gliding rack.
Shake the graphite lubricant before
opening it.
Apply 4 drops of lubricant to the inner
side of the left sliding track and 4 drops
to the outer side of the left sliding
track.
Repeat Step 2 above on the right
sliding track.
Extend and collapse the gliding rack
several times to distribute the lubricant.
English 49
2019-02-06 1:26:37