Samsung NY36R9966P Serie Manual Del Usuario página 47

Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. We recommend
that you remove food spills immediately after they take place.
CAUTION
• Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage
the enamel surface.
• Do not remove the cooktop surface for cleaning. The gas lines leading to the
burner manifolds can be damaged, resulting in a fire or system failure.
• Do not pour water into the cooktop well while cleaning the cooktop. The water
could leak down into the range gas and electrical systems creating a risk of
electrical shock or high levels of Carbon Monoxide, due to corrosion of the gas
valves or ports.
• Keep oven vent ducts unobstructed. Clean vents frequently to avoid grease
buildup.
NY9900R_CHEF_NY36R9966PS_AA_DG68-01105B-00_EN+MES+CFR.indb 47
1. Turn off all surface burners.
2. Wait until all burner grates cool down,
and then remove them.
3. Clean the cooktop surface using a soft
cloth. If food spills run into the gaps
around a burner component, remove
the burner cap and head, and then wipe
up the spills.
4. When cleaning is finished, reinsert the
burner components, and then put the
burner grates back into position.
Burner grates and components
Turn off all surface burners and make sure they have all cooled down.
1.
2.
3.
1
4.
2
5.
3
6.
8
7.
7
8.
6
9.
Remove the burner grates.
Remove the burner caps from the
burner heads.
Remove the burner heads from the
valve manifolds to reveal the starter
electrodes.
Clean all removable grates and burner
components in warm, soapy water. Do
not use steel-wool pads or abrasive
cleaners.
Rinse and dry grates and burner
components thoroughly.
Return the burner heads to their
positions on top of the manifold
valves. Make sure a starter electrode
is inserted through the hole in each
burner head.
Return the burner caps to their
positions on top of burner heads. To
ensure proper and safe operation, make
sure the burner caps lie flat on top of
the burner heads.
Reinstall the burner gates in their
respective positions.
Turn on each burner and check if it
operates properly. After verifying that
a burner operates normally, turn it off.
English 47
2019-02-06 1:26:36