Honeywell HCM-300T Manual Del Usuario página 4

HCM-300T_HCM-310T_OM.qxd
SETTING UP YOUR HUMIDIFIER (CONT'D)
Placement
Step 1
Soak Filter
Step 1
Remove the water tank
and carefully set aside.
Fill Tank
Step 1
Turn tank upside-down.
Remove tank cap by
turning counter-
clockwise
Power
Step 1
4 4
5/22/06 5:56 PM Page 4
Select a firm, level location at least 6" (15cm) from any
walls for proper airflow. Place the humidifier on a water-
resistant surface, as water can damage furniture and
some flooring.
Kaz will not accept responsibility for property damage
caused by water spillage.
Step 2
Remove the filter from
the holding basket.
Soak the filter in cool water.
DO NOT squeeze filter.
Step 2
Fill tank with cool
tap water.
Replace tank cap. Tighten
. by turning clockwise
Place tank back on
humidifier.
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE
THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Step 3
Place wet filter back in
the filter holding basket
and place back in unit.
Step 3
Once the filled water tank
has been placed on the
unit do not move
humidifier. Doing so
.
could cause leakage and
spills.