Setting Menu - Daewoo DTC-450 Manual De Instrucciones

ENG
When there is an incoming call while using auto-redial, pick up the handset or press key to
answer the call. The auto redial function will be terminated.
REVIEW, CALL BACK AND DELETE INCOMING NUMBERS
 Review
In on-hook state, press /+ or /- key to scroll and review the numbers.
 Delete
In on-hook state, when the desired number is shown, press DEL key, the number is deleted. Or
press and hold DEL key for 3 seconds, all the reviewed incoming numbers are deleted.
 Call back
In on-hook state, scroll to the desired number, press or REDIAL key or pick up the handset,
the number is dialed out. Or press REDIAL key twice, the telephone will add the long distance
code ahead the number automatically and then dial back.
Note: If the PABX code is set, the telephone will detect and add the PABX code before the number
automatically and then dial back. It will dial the PABX code fi rst and then after a 2 second pause
and then dial the number.
REVIEW, CALL BACK AND DELETE OUTGOING NUMBERS
 Review
In on-hook state, press OUT/× key, then repeat to press OUT/× to review outgoing numbers one
by one.
 Call back
1. In on-hook state, press OUT/× key to review the desired number, then press or REDIAL key
or pick up the handset, and the number is dialed out.
 Delete
1. In on-hook state, press OUT/× key to scroll to the desired number.
2. Press DEL key and the number is deleted.
3. Or press and hold DEL key for 3 seconds, all numbers will be deleted.
PREVENT FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1. In on-hook state, press and hold ALARM/P key for 3 seconds, LCD displays DATE ON,
2. Press ALARM/P key again, LCD displays DATE OFF. Press SET key to quit.
Note: DATE OFF: Does not allow real time auto adjustment.

SETTING MENU

 Setting date & time
1. In on-hook state, press SET key, LCD displays SET 1 DATE and press SET key again, the value
for the year fl ashes.
2. Press /+ or /- key to edit the year.
3. Press SET key to confi rm and enter the next value month setting.
4. Repeat the above steps for month setting.
5. Repeat the above steps for date and time setting.
16