Get Started - Daewoo DTC-450 Manual De Instrucciones

LOCATION DESCRIPTION
1. LCD
2. UP/+
3. SET
4. CAL
5. IN USE LED
6. DEL
7. ST/RECALL
8. HOLD/RING
9. ALARM/P
10. ARD
11. REDIAL
12. HF
13. OUT/X
14. DOWN/-
15. M1-M8
16. FLASH/÷
17. MUTE
18. NUMERICAL KEY
19. LINE

GET STARTED

1. The unit requires 3×1.5V AA batteries. Open the battery compartment cover and insert the
batteries in the right polarity, then close the cover (Proposal using alkali battery). There should
be time display on the liquid crystal screen after the batteries are inserted.
2. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet
of exchanger.
3. Connect the handset and the unit with coiled line.
4. Setting the dialing mode to correct mode according to the directions from your local
telecom.
5. Apply for the caller ID from your local telecom offi ce.
ENG
14