Setting Pabx Code - Daewoo DTC-150 Guia Del Usuario

SETTING MENU
SETTING DATE AND TIME
1. In on-hook state, press [SET] key, LCD displays SET 1 DATE
2. Press [SET] key, the last two digits of year flash.
3. Press [▲] or [▼] key to edit the year, Press [SET] key to confirm, by using the same method to set the
month, date, hour and minute.
Unit will save and quit after 12 seconds.
NOTE
Scope: Month: 1-12 Date: 1-31 Hour:00-23 Minute:00-59
SETTING LOCAL AREA CODE
1. At on-hook state, press [SET] key and then press [▲] key, LCD will display SET 2 CODE
2. Press [SET] key again, LCD displays CODE- - - - -
3. Press [▲] or [▼] key to set the first digit of local area code;
4. Press [SET] key to confirm and enter the second digit setting, by using the same method to set the last 4
digits.
5. Unit will save and quit after 12 seconds.
NOTE: If the local area code only 4 digits, the last digit can be left as "-".
After set the local area code, unit will auto-filter the area code if the incoming call number with the first several
bits as same as the local area code.

SETTING PABX CODE

1. At on hook state, press [SET] key
2. Press [▲] key twice, LCD displays SET 3 PCODE.
3. Press [SET] to confirm, LCD displays PCODE--
4. The first "-" flashes and indicates to set the first code.
5. Press [▲] or [▼] key to set the first code, Press [SET] key to confirm to enter the next one.
6. Unit will save and quit after 12 seconds.
NOTE
If only one digit of PABX code, left the second digit as "-".
If set PABX code, when dialing back incoming call, and if the incoming number is more than 6 digits, unit will
auto-add PABX ahead the number and pause 1 second.
SETTING AUTO IP (this function is invalid)
SETTING DIALING MODE
At on hook state, press [SET] key
1
Press [▲] key four times, LCD displays SET 5 P-T
2
Press [SET] to confirm, LCD displays TONE
3
Press [▲] or [▼] key to select PULSE or TONE
4
Press [SET] to confirm.
5
All manuals and user guides at all-guides.com
6