One Touch Memory Operation; Two Touch Memory Operation - Daewoo DTC-450 Manual De Instrucciones

ENG

ONE TOUCH MEMORY OPERATION

 Store the number in one-touch memory
1. Pre-dial the desired number or checking incoming and outgoing number that you want to
store.
2. Press ST/RECALL key. Press Mi (i=1~8) key
 Make a call from one-touch memory
In off -hook or on-hook state, press Mi (i=1~8) key to dial the stored number out.
Or in on-hook state, press ST/RECALL key + Mi (i=1~8) key, LCD displays the stored number,
press or REDIALkey or pick up the handset to dial it out directly, or press REDIAL key twice to
dial out number ahead with long distance code.

TWO TOUCH MEMORY OPERATION

 Store the number in two-touch memory
1. Pre-dial the desired number or checking incoming and outgoing number that you want to
store.
2. Press ST/RECALL key, press one of digit keys (0-9)
 Make a call from two-touch memory
In on-hook state, press ST/RECALL key + digit key (0-9) key, LCD displays the stored number,
press or REDIAL key or pick up the handset to dial it out directly, or press REDIAL key twice
to dial out number ahead with long distance code.
In off -hook state, press ST/RECALL key + digit key (0-9) key, the stored number will be dialed
out.
BABY CALL/BABY LOCK/OFF LINE FUNCTION
 BABY CALL function
At on-hook state, press and hold REDIAL key for 3 seconds to come into baby call function setting.
LCD displays BABYCALL OFF (ON), press /+ or /- key to set it ON or OFF, press SET key to
confi rm. If you select ON, LCD displays NO CODE (or the preset baby call number, press DEL key
to cancel), input baby call number using numerical key and press SET key to confi rm.
After set baby call function to ON state, pressing any key except REDIAL key or picking up handset
will dial out the baby call number automatically.
When baby call function is ON state, you can still answer the incoming call.
Note: If you don't use the function, enter baby call function setting as per above operation and
select BABYCALL OFF, press SET key to confi rm.
 BABY LOCK function
At on-hook state, press and hold REDIAL key for 3 seconds, LCD displays BABYCALL OFF(ON),
then press REDIAL key once to enter into BABY LOCK setting, and the LCD displays BABYLOCK
OFF(ON), press /+ or /- key to set it ON or OFF, then press SET key to confi rm.
After set baby lock function to ON state, pressing any number will invalid except emergency
numbers.
 OFF LINE function
At on-hook state, press and hold REDIAL key for 3 seconds, LCD displays BABYCALL OFF(ON),
then press REDIAL key twice to enter into OFF LINE setting, and the LCD displays OFFLINE
OFF(ON), press /+ or /- key to set it ON or OFF, then press SET key to confi rm.
20