Daewoo DTC-450 Manual De Instrucciones página 17

ENG
 Setting Local Area Code
1. In on-hook state, press SET key and press /+ key, LCD displays SET 2 CODE, press SET key
again, LCD displays CODE ------ and fi rst "-" fl ashes.
2. Press /+ or /- key to edit the fl ashing code.
3. Press SET key to confi rm and enter the next fl ashing code setting.
4. Repeat the above steps for the rest code setting.
 Setting Long Distance Code
1. In on-hook state, press SET key and press /+ key twice, LCD displays SET 3 LCODE, press SET
key again, LCD displays ---------------0 or preset codes, press DEL key to delete it.
2. Input the long distance codes using numerical keys, maximum 16 digits.
3. Press SET key to confi rm and exit.
 Adjusting LCD Contrast
1. In on-hook state, press SET key and press /+ key three times, LCD displays SET 4 LCD, press
SET key again, LCD displays LCD 5
2. Press /+ or /- key to adjust the LCD contrast, total 8 levels can be selected.
3. Press SET key to confi rm and exit.
Shortcut key: At on-hook state, press FLASH/÷ key to enter LCD contrast setting directly, then
press FLASH/÷ key continuously to adjust the LCD contrast.
 Setting Flash Time
1. In on-hook state, press SET key and press /+ key four times, LCD displays SET 5 FLASH, press
SET key again, LCD displays FLASH 100
2. Press /+ or /- key to edit the fl ash time to 100, 300, 600 and 1000ms.
3. Press SET key to confi rm.
Note: press DEL key, or no operation within 16s, it will exit setting mode and return to the on
hook state.
 Setting the PABX CODE
1. In on-hook state, press and hold DEL key 3 seconds to set PABX code, LCD displays PCODE -
and the "-" fl ashes.
2. Press /+ or /- key to set PABX code from 0 to 9 or -.
3. If choose "-", it means no PABX code has been set.
4. Press SET key to confi rm and quit.
 Setting Alarm Clock
1. In on-hook state, press ALARM/P key once, LCD displays 12-00 AL1,
2. Press /+ or /- key to select ON or OFF. LCD displays "ALM" icon when the alarm is set to
ON.
3. Press SET key, value "12" starts to fl ash.
4. Press /+ or /- key to set the alarm hour and press SET key to confi rm and enter alarm
minute setting.
5. Press /+ or /- key to edit alarm minute and press SET key to confi rm and go to next group
alarm clock setting.
6. Repeat the above steps to set additional alarms.
Note: The fi rst 3 groups alarm clock will be repeated periodically every day while the last 2 groups
alarm clock is eff ected one time.
17