Setting Menu - Daewoo DTC-400 Manual De Instrucciones

1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE
OFF,
2. Press ALARM key again, LCD displays DATE ON,
3. Press SET key to quit.
NOTE: DATE OFF: Does not allow real time auto adjustment
EVIEWING, CALLING BACK AND DELETING OUTGOING NUMBER
 Reviewing
In on-hook state, press OUT key, then repeat to press OUT to review outgoing
numbers one by one.
 Calling back
1. In on-hook state, press OUT key to review the desired number, then press
SPEAKER key or pick up the handset, and the number is dialed out, or
2. Press REDIAL key, LCD displays PICK UP, press SPEAKER key or pick up the
handset, the number is dialed out.

Deleting
1. In on-hook state, press OUT key to scroll to the desired number.
2. Press DEL key and the number is deleted, or
3. Press and hold DEL key for 3 seconds. All numbers will be deleted.

SETTING MENU


Setting date & time
1. In on-hook state, press SET key, the value for the year fl ashes.
2. Press UP or DOWN key to edit the year.
3. Press SET key to confi rm and enter the next value month setting.
4. Repeat the year setting step to set the month.
5. Repeat the above steps for date and time setting.
 Setting Local Area Code and Long Distance Code
1. After setting up the date and time, press SET key. LCD displays CODE 0----- and
the long distance code "0" fl ashes,
2. Press UP or DOWN key to edit the fl ashing code from 0 to 9 or -.
3. Press SET key to confi rm and enter the next fl ashing code setting.
4. Repeat the above steps for the rest code setting.
 Adjusting LCD Contrast
1. After setting up the local area code, press SET key, LCD displays LCD 08.
2. Press UP or DOWN key to adjust the LCD contrast, total 16 levels can be selected.
3. Press SET key to confi rm and exit.
At on-hook state, press R key to enter LCD contrast setting directly, then press R key
continuously to adjust the LCD contrast.
ENG
17