Tabla de contenido
■
Connecting three UM-3EX units
fig.triple-e.eps_67
Connect to the
USB connector
of your computer.
Connect to the
UM-3EX connector
of the first unit
(MASTER)
MODE select switch and UNIT number select switch settings
MODE select switch
UNIT number select switch
* Don't change the setting of the MODE select switch or UNIT number select switch while the UM-3EX
is connected to your computer. You must first disconnect the UM-3EX from your computer. Then, after you've
changed the settings of its switches, you can reconnect it to your computer.
Set this to
Set this to
MASTER.
1.
• Select the MASTER setting for the UM-3EX that's connected to
the computer.
• Select the SLAVE setting for UM-3EX units that are connected
to the UM-3EX connector.
• Set the first unit to 1.
• Set the second unit to 2.
• Set the third unit to 3.
First unit
Set this to
Set this to
SLAVE.
Set this to
Set this to
SLAVE.
2.
Second unit
3.
Third unit
45
Tabla de contenido
