Tabla de contenido
■
FreeMIDI settings
1.
Operation of the UM-3EX
2.
Operation of the UM-3EX
3.
Operation of the UM-3EX
* Connect the cable to the USB connector of the Macintosh itself, not to the USB connector of the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-3EX is
required before the unit will operate normally.
4. From the CD-ROM, drag the Driver E (Mac OS 9) - FreeMIDI Setting folder into the FreeMIDI
Applications folder on the hard disk of your Macintosh to copy it there.
5. Open the FreeMIDI Applications folder from the location into which you installed FreeMIDI, and
double-click the FreeMIDI Setup icon to start it up.
When "OMS is installed on this computer..." appears, click [FreeMIDI].
6. The first time you start up, use the following procedure.
1. A dialog box saying "Welcome to FreeMIDI!" will appear.
Click [Continue].
2. The FreeMIDI Preferences dialog box will appear.
Click [Cancel].
3. The About Quick Setup dialog box will appear.
Click [Cancel].
7. From the File menu, choose Open.
If you are unable to select Open, return to step 5 and continue the procedure.
1. From the File menu, choose FreeMIDI Preference.
2. Uncheck "Use OMS when available."
3. Close FreeMIDI.
8. Select UM-3 from the FreeMIDI Setting folder you copied in step 4, and click [Open].
9. Verify that MIDI transmission and reception occur correctly.
From the MIDI menu, choose Check Connections.
36
Set the UM-3EX's MODE select switch to MASTER.
Set the UM-3EX's UNIT number select switch to 1.
Connect only one UM-3EX to your Macintosh.
Tabla de contenido
