Makita DVC860L Manual De Instrucciones página 8

Auto-suction stop during wet
suction operation (for the cloth filter
model)
WARNING:
Do not use for a long time while the float is at
•
work. Using the cleaner with its float at work for
a long time can cause overheat, resulting in the
cleaner deformation.
Do not pick up foam or soapy liquid. Picking
•
up foam or soapy liquid can cause foam to come
out of air exit before the float works. Continuing
to using in this condition may cause an electric
shock and breakage of the cleaner.
Auto-suction stop works only when using with the float
and float cage.
The cleaner has a float mechanism that prevents water
from immersing into the motor when picking up more
than a certain amount of water.
When the tank is full and the cleaner no longer picks up
water, switch off the cleaner and empty the tank.
Locking or unlocking the caster
1
► 1. Caster 2. Stopper lever 3. FREE position
4. LOCK position
To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
NOTE:
• When moving the cleaner, make sure that the
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage
to the caster.
Carriage handle
When carrying the cleaner, carry it by holding the han-
dle on the head. The handle is retractable at the head
when not in use.
PARTS DESCRIPTION
Model DVC860L
(Cloth filter (for dry and wet dust) model)
3
4
2
► 1. Tank cover 2. Float 3. Float cage 4. Cloth filter
8 ENGLISH
4
5. Tank
1
2
3
5