Operation Without Dmx Controller; Music Control; Colour Spotlight; Automatic Mode - IMG STAGELINE LED-10SPOT Manual De Instrucciones

The settings of the spotlight are made via a
system menu . This menu is operated via four
buttons by means of the display (menu structure
☞ page 11, fig . 1) . To activate the display, press
any button . The last setting will be displayed . If
no button is pressed, the display will be extin-
guished after approx . 17 seconds . Set the corre-
sponding operating mode according to chapter
5 or 6 .
Note: If you disconnect the spotlight from the pow-
er supply before the display is extinguished, any set-
ting made will not be saved .

5 Operation without DMX Controller

5.1 Music control

To control the spotlight to the beat of music via
its integrated microphone, two sound modes are
available:
white light flashing to the beat of music
light flashing to the beat of music in
changing colours
1) Press the button MENU repeatedly until you
reach the highest menu level .
2) Select the menu item
UP or DOWN .
3) Press the button ENTER: The last sound mode
adjusted ( or
displayed . Select one of the two modes with
the button UP or DOWN .

5.2 Colour spotlight

For radiating a single colour continuously, the
spotlight offers nine preset colours and one
colour to be individually adjusted .
1) Press the button MENU repeatedly until you
reach the highest menu level .
2) Select the menu item
UP or DOWN .
3) Press the button ENTER: The last colour mode
adjusted (one of the preset colours
or the individual colour setting
be activated and displayed . Select the desired
colour mode with the button UP or DOWN .
Individual colour setting
In the mode you will be able to separate-
ly adjust the brightness of the four colours of
with the button
) will be activated and
with the button
...
) will
the LED in order to mix the desired shade of
colour:
a) If has been selected, press the button
ENTER . The last colour adjusted (red
green , blue
ness value will be displayed .
b) Set the brightness of the colour selected
with the button UP or DOWN (indication
0 – 255) .
c) Press the button ENTER to go to the next
colour and set its brightness .

5.3 Automatic mode

Three show programs are available for an auto-
matic light show:
1) Press the button MENU repeatedly until you
reach the highest menu level .
2) Select the menu item
UP or DOWN .
3) Press the button ENTER: The last program ad-
justed ( ,
ed and displayed . Select the desired program
with the button UP or DOWN .
4) To change the program speed, press the
button ENTER: The current speed will be dis-
played . Select one of the nine speeds
with the button UP or DOWN .

5.4 Master/Slave mode

Several LED-10SPOT spotlights can be operated
in sync in automatic mode or by music control .
The first unit (master) will control the other units
(slaves) . Connect the units in a chain . See chap-
ter 6 .1 "Connection" but skip step 1 .
Set the master unit (the first unit in the chain;
its DMX input is not connected) to automatic
mode or music control (
Set the slave units to the slave mode:
1) Press the button MENU repeatedly until you
reach the highest menu level .
2) Select the menu item
UP or DOWN .
3) Press the button ENTER: The slave mode will
be activated and
soon as the slave unit receives control signals
from the master unit, a dot starts flashing on
the display .
or white ) and its bright-
with the button
or ) will be activat-
☞
chapter 5 .1 or 5 .3) .
with the button
will be displayed . As
,
to
9