Important Information; About This Document; Warnings And Symbols - Air Techniques ProVecta 3D Prime Instrucciones De Uso

Important information

1

About this document

These installation and operating instructions are
an integral part of the unit�
Air Techniques shall not be held liable
and offers no guarantees of the safe and
smooth operation of this unit if you fail to
comply with notes and instructions con-
tained in these Installation and Operating
Instructions�
Refer to the separate installation instructions for
information about assembly, installation and
configuration of the unit�

1.1 Warnings and symbols

Warnings
The warning notes in this document highlight
possible injury to persons or damage to machin-
ery�
They are marked with the following warning
symbols:
General warning symbol
Warning – risk of dangerous electric volt-
ages
Warning – X-rays
The warnings are structured as follows:
Description of type and source of
danger
Here you will find the possible conse-
quences of ignoring the warning
Follow these measures to avoid the
i
danger�
The signal word differentiates between different
levels of danger:
– DANGER
Direct danger of severe injury or death
– WARNING
Possible danger of severe injury or
death
– CAUTION
Risk of minor injuries
– NOTICE
Risk of extensive material/property damage
2210200496L41 1904V004
OBJ_DOKU-0000003575-mehrere-005.indd 3
Miscellaneous symbols
These symbols are used in the document and
on or in the unit:
Note, e�g� specific instructions regarding
the efficient use of the unit�
Part number
Serial number
CE labeling with the number of the noti-
fied body
Manufacturer
Caution: Federal law restricts this device
to sale by or on the order of a Doctor�
Dispose of correctly in accordance with
EU Directive 2012/19/EU (WEEE)�
Type BF applied part
Do not reuse
Not sterile
Sterilize with steam at 134 °C
Protective ground connection
Equipotential bonding
Fragile, handle with care
Lower and upper atmospheric pressure
YY
limits
XX
YY
Lower and upper temperature limits
XX
YY
Lower and upper humidity limits
XX
no condensation
Stacking limits
n
Recycling
EN
US
3
17.04.2019 14:28:51