2�9 Essential Performance; 10 Only Use Genuine Parts; 13 Protection From Cybersecurity; Threats - Air Techniques ProVecta 3D Prime Instrucciones De Uso

Important information
NOTICE
Erroneous operation mode due to
use immediately adjacent to other
devices or with other stacked de-
vices
Do not stack the unit together with
i
EN
other devices�
US
If this is unavoidable, note any poten-
i
tial impacts on the operation mode�
NOTICE
Reduced performance features due
to insufficient distance between unit
and mobile HF communication de-
vices
Keep at least 30 cm distance be-
i
tween the unit (including parts and
cables of the unit) and mobile HF
communication devices (wireless
units) (including their accessories
such as antenna cables and external
antennas)�
2.9 Essential performance charac-
teristics
The unit does not have any essential perfor-
mance characteristics as set out in IEC 60601-1
section 4�3�
The unit meets the requirements according to
IEC 60601-1-2:2014�

2.10 Only use genuine parts

Only Air Techniques accessories and special
i
accessories or those approved by Air Tech-
niques may be used�
Only use original spare and replacement
i
parts�
Air Techniques accepts no liability for
damage resulting from the use of non-
approved accessories, special accesso-
ries or any parts other than original spare
and wear parts�
The use of non-approved accessories,
special accessories or non-genuine
working parts / spare parts (e�g� mains
cable) can have a negative effect on the
electrical safety and EMC�
The following accessories may affect EMC:
– Mains cable (3�6 m; order no�: A7782)
– Exposure switch (order no�: A7801)
6
OBJ_DOKU-0000003575-mehrere-005.indd 6
2.11 Transport
Only the original packaging ensures optimum
protection for the unit during transport�
If necessary, the original packaging for this unit
can be ordered from Air Techniques�
Air Techniques cannot be held responsi-
ble for any damage resulting from trans-
port in unsuitable packaging, even during
the warranty period�
Only transport the unit in its original packag-
i
ing�
Keep all packaging away from children�
i
Reattach the transport locking devices�
i
Do not expose the unit to any strong vibra-
i
tions or shocks�
Do not bump or pull the unit�
2.12 Disposal
Device
The units and electronic circuits may be dis-
posed of only in proper facilities for recycling
and recovery� Make sure to dispose of these
objects in compliance with the applicable laws
and regulations of the federal, national, state
and municipal authorities�
X-ray emitter
The X-ray emitter contains a tube that is poten-
tially capable of imploding, lead cladding and
mineral oil�

2.13 Protection from cybersecurity

threats

The unit is to be connected to a computer that
can be connected to the Internet� Therefore, the
system needs to be protected from threats from
the Internet�
Use antivirus software and update it regularly�
i
Look for evidence of possible virus infection
and, if applicable, check with the antivirus
software and remove the virus�
Perform regular data backups�
i
Provide access to units only to trustworthy us-
i
ers, e�g� by means of user name and pass-
word�
Make sure that only trustworthy contents are
i
downloaded� Install manufacturer-authenticat-
ed software and firmware updates only�
2210200496L41 1904V004
17.04.2019 14:28:52