Gas Conversion; Tools And Parts For Gas Conversion; Conversion From Lp Gas To Natural Gas - KitchenAid 860-0003 Instrucciones De Instalación Y Manual De Uso Y Cuidado

Tools and Parts for Gas Conversion

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed Read and follow the instructions provided with any tools listed
here.
Tools needed
 Phillip screwdriver
 Pipe Wrench
 Adjustable wrench
 6 mm socket and  6 mm socket and
wrench or 6 mm nut
driver
Parts supplied
 Natural gas orifices
Parts needed
 Natural gas conversion kit Part Number 710-0003. See
 "Assistance" section to order. The conversion kit includes: Assistance section to order. The conversion kit includes:
 Natural gas regulator 4" W.C. (marked "Natural Gas
 Regulator")
10 ft (3.0 m) Natural gas hose with Quick Connector

assembly 5.9" (150 mm)
 6 mm nut driver
 6 mm wrench
 Hex key
  Flat washer Fl t h
 Truss head screw with lock
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the appliance.
GAS CONVERSIONS
Thin flat-blade
screwdriver
 Needle Nose Pliers
 Pipe thread sealant Pipe thread sealant
certified for LP gas
24mm wrench

Conversion from LP Gas to Natural Gas

Installation of the regulator Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from
the grill cart.
5. Use an adjustable wrench to remove the LP
regulator from the manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill
cart with the two screws that are preassembled on the cart with the two screws that are preassembled on the
regulator.
19