Connecting The Torch - ESAB PowerCut 700 PT-39 Manual De Instrucciones

US
5.5.1 Disconnecting the Torch
Always obey the safety rules above.
1. Disconnect the power at the wall or unplug the power supply.
2. Press the nylon tab on the torch­side connector.
3. Pull the two halves apart while holding the tab down.
5.5.2

Connecting the Torch

Always obey the safety rules above.
1. Disconnect the power at the wall or unplug the power supply.
2. Press the release button on the female gas connector to make sure that the
locking mechanism is not engaged.
3. Align the gas connectors and engage them.
4. Align the electrical connections and engage them.
5. Press the two halves together until you hear the click that indicates that the gas
connectors are locked together.
6. Pull on the connector gently to make sure that it is properly locked in place.
bp23aa
- 14 -
© ESAB AB 2012