Other Functions; Adjusting The Sound Characteristics; Quickly Attenuating The Sound; Canceling The Beep Sound - Sony CDX-L430X Manual De Instrucciones

Other Functions

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of the volume +/– button.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT).
"ATT" appears in the display.
To restore the previous volume level, press
(ATT) again.

Canceling the beep sound

Press (6) while pressing (SEL) down.
To activate the beep sound again, press these
buttons again.
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be deactivated.
Selecting the sound
position

— My Best sound Position (MBP)

When you drive without passengers, you can
enjoy the most comfortable sound
environment with "My Best sound Position."
"My Best sound Position" has two presets,
which adjust the sound level of balance and
fader. You can select one very easily with the
MBP button.
Balance Level
Display
window
Right
MBP-A
– 4dB
MBP-B 0
MBP-OFF
0
Press (MBP) repeatedly for the desired
listening position.
The mode of "My Best sound Position" is
shown in the display in order of the table.
If you want to adjust the sound level of
balance and fader more precisely, you can
do it using the (SEL) button(see "Adjusting
the sound characteristics").
Notes
• When the BAL (balance) or FAD (fader) in
"Adjusting the sound characteristics" is adjusted,
the MBP setting returns OFF.
• When MBP is set to OFF, the BAL and FAD setting
is activated.
Fader Level
Left Front Rear
0 0 – 4dB
– 4dB 0 – 4dB
0 0 0
11