Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNINg:
When servicing use only identical RIDGID
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNINg:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNINg:
To avoid serious personal injury, always remove
the battery pack from the tool when cleaning or
performing any maintenance.
gENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
REPLACINg THE MOTOR PINION CAP
See Figure 12, page 17.
If over time you notice the noise of the tool getting louder
than usual, check the condition of the motor pinion cap. If the
cap is excessively damaged so that the metal gear is clearly
visible, remove it and replace with the spare cap included.
NOTE: To reduce the noise level of the tool, do not operate
without the motor pinion cap installed.
NOTE: FIgURES (ILLUSTRATIONS) START ON PAgE 16
AFTER FRENCH AND SPANISH LANgUAgE SECTIONS.
WARNINg:
Do not at any time let brake fluids, gasoline,
®
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
bATTERY PACk REMOVAL AND PREPARATION
FOR RECYCLINg
WARNINg:
Upon removal, cover the battery pack's terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove any
of its components. Lithium-ion batteries must be
recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body
parts as short circuit may result. Keep away from
children. Failure to comply with these warnings
could result in fire and/or serious injury.
13 - English
Tabla de contenido
