Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note
• The wireless transmission range between the measuring and base stations is up to 30 m in open
spaces. Before installation, ensure that wireless transmission will not be disrupted by interference or
obstacles like buildings, trees, vehicles, high-voltage lines, etc.
• Before the final installation, ensure that there is sufficient reception between the intended installation
locations.
• When installing the measuring station, ensure that it is protected from direct sunlight and rain.
• The international standard height for measuring air temperature is 1.25 m (4 ft) above ground.
Warning
• Buy special or suitable installation material from a specialised dealer for wall-mounting.
• Ensure that no faulty or damaged parts are installed.
• Never apply force during mounting. This could damage the product.
• Before mounting, ensure that the chosen wall is suitable for the weight to be mounted, and make sure
that there are no electrical wires, water, gas or other lines at the installation site on the wall.
5.1 Base station
• Use the base (35) to position the base station on a level surface.
• Alternatively, you can install the basestation on a wall using the opening (33) on the back.
5.2 Measuring station
• You can also position the measuring station on a level outdoor surface using the base.
• We recommend installing the measuring station securely on an outdoor wall.
• Install an anchor, screw, nail, etc. in the wall of your choice.
• Hang up the base/measuring station using the opening (33/39) intended for this purpose.
6. Operating the Base Station
Note – Input
• Hold down the MIN/MAX button (30) or the + button (31) to select the values faster.
If you press the SNOOZE / LIGHT button (32), the display will light up for approx. 10 seconds.
5
Tabla de contenido
