Ac Voltage - AEMC Instruments 505 Manual De Usuario

2.3.3 AC Voltage

1. Set the switch to
2. Connect the red test lead to the + input terminal and the black test lead
to the COM input terminal.
3. Touch the lead probe tips to the AC circuit to be measured.
4. Read the result on the LCD.
If the meter detects voltage >30V
the LCD. In this case, immediately remove the probes from the circuit
under test. Also remove the probes from the circuit if the reading
displays OL.
Clamp-On Meter Model 505
Figure 7
.
, the
AC
(hazardous) icon appears on
13