Sound Is Distorted - Roland EDIROL AUDIOCapture UA-1A Manual Del Usuario

Troubleshooting
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may
appear. If this occurs, click [OK], and close the other applications.
Even if an application window is closed, it is still running if it remains in the
taskbar, so be sure to quit any unneeded applications shown in the taskbar.
• Have you specified the audio data output destination for OS?
The audio data output destination for a computer must be set to UA-1A. For
details on this setting, refer to Specifying the audio input/output device
(Windows p. 14) or Making the sound settings (Macintosh p. 21).
• Have you specified the audio data output destination for your
playback software?
For some software, you must set the audio data output destination as UA-1A.
For details on this setting, refer to the owner's manual for the software.
• Have the drivers been installed correctly?
In order to playback audio data using the UA-1A, the USB Audio Device
driver must be installed. For details on installation and settings, refer to
Connections and driver installation (Windows p. 9, Macintosh p. 19).
• Are the various Volume Control faders raised?
Adjust the volume of each fader as described in Volume Control settings
(Windows p. 15) or Making the sound settings (Macintosh p. 21).

Sound is distorted

• Is the volume level of the instrument connected to LINE IN too
high?
Use the Line input adjustment slider of the UA-1A to reduce the input level.
The volume level of the instrument connected to LINE IN is
too low.
• Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
• Is the Line Input adjustment slider raised appropriately?
26