Roland EDIROL AUDIOCapture UA-1A Manual Del Usuario página 16

Connections and driver installation (Windows)
If using Windows Me:
Select [Start] - [Settings] - [Control Panel]. In the [Control
Panel], double-click the [System] icon to access the System
Properties dialog box. Click the [Device Manager] tab, and
double-click the [CDROM] icon. Below it, double-click the
CD-ROM drive that you are using and open its Properties.
Click the [Properties] tab, and select the check box located
beside the Digital CD playback item "Enable digital CD
audio for this CD-ROM device."
If using Windows 2000
In the same way as for Windows Me, open the System
Properties dialog box. Click the [Hardware tab], and click
the [Device Manager] button to open the Device Manager.
From the CD-ROM drives, double-click the CD-ROM drive
that you are using to open its Properties. Click the
[Properties] tab, and select the check box located beside the
Digital CD playback item "Enable digital CD audio for this
CD-ROM device."
using Windows 98 or Windows 98 SE:
Select [Start] - [Settings] - [Control Panel] - [Multimedia],
then click on the [CD Music] tab, then check "Enable CD
digital audio for this CD-ROM device."
Depending on your computing environment, playback of
these CDs may still be impossible. For details, refer to
information provided by your computer's manufacturer. If
you are using a PC-card (PCMCIA) type CD-ROM drive,
playing back WAVE data or an audio CD on the CD-ROM
drive may cause the sound to be interrupted, or no sound
may be heard at all.
16
When using your computer's CD-ROM drive to
play an audio CD, or when playing background
music for games with the UA-1A.