Windows 2000 Users; Windows 98 Users - Roland EDIROL AUDIOCapture UA-1A Manual Del Usuario

Windows 2000 Users

* If you are using a Windows Me machine, refer to p. 10, if Windows
98, refer to p. 11.
1
Turn on the power of your computer and start up
Windows.
2
Use a USB cable to connect the UA-1A to your
computer. The UA-1A is recognized to the computer
and the driver is installed all automatically.
3
After installing the driver, restart Windows.

Windows 98 Users

* If you are using a Windows Me machine, refer to p. 10, if Windows
2000, refer to p. 11.
Installation must be performed in the order of the USB
Composite Device driver and then the USB Audio Device
driver. Use the following procedure to perform the
installation.
fig.02-05.e
1
Turn on the power of your
computer and start up
Windows. Insert the
Microsoft Windows CD-
ROM into your CD-ROM
drive, and use a USB cable
to connect the UA-1A to
your computer.
Since some computers are sold with the contents
of the Microsoft Windows CD-ROM already in
the hard disk, a Microsoft Windows CD-ROM
may not have been included. If this is the case,
you will be able to install the driver without the
Microsoft Windows CD-ROM.
Connections and driver installation (Windows)
11