Roland EDIROL AUDIOCapture UA-1A Manual Del Usuario página 15

6
Click [OK] to complete the settings.
Volume Control settings
The output volume of the UA-1A can be controlled by the
Windows Volume Control.
1
Click the Windows [Start] button, and select
[Programs] - [Accessories] - [Entertainment] -
[Volume Control] to start it up.
Windows Me
fig.02-17.e
2
You can raise or lower the slider to adjust the volume
of the UA-1A. The following items can be set.
WAVE
SW Synth
CD Player
*1 If the playback of the CD does not change when you
adjust this volume, change the WAVE volume.
Windows 2000/
Windows 98/Windows 98SE
Adjust the volume that is output from the
audio output device "USB Audio Device."
Adjust the volume of the software
synthesizer built into Windows.
Adjust the "CD Music" volume for the CD-
ROM drive of your computer.(*1)
Connections and driver installation (Windows)
If Volume Control is not
installed on your
computer, use Add/
Remove Applications in
the Control Panel to
install it. For details on
installation, refer to the
Windows owner's manual
or Help.
The audio quality of the
UA-1A will be better if
you raise the Volume
Control levels.
If Mute is checked, or if the
slider is in the lowest
position, no sound will be
output from the UA-1A.
If you are using Windows
2000 and "CD Player" does
not appear, check the
[Digital CD playback] item
"Enable digital CD audio
for this CD-ROM device,"
as described in the
cautionary note on the
following page.
15