OFF
55
75
ON
START
505014*
502026
502025
EMC48010
MAIN SWITCH (for Tiller control
model)
The main switch controls the ignition sys-
tem; its operation is described below.
8 OFF
Electrical circuits switched off. (The key
can be removed.)
8 ON
Electrical circuits switched on. (The key
cannot be removed.)
8 START
Starter-motor will turn and start engine.
(When the key is released, it returns auto-
matically to "ON")
EMC64011*
THROTTLE FRICTION ADJUSTING
SCREW/ KNOB
A friction device in the tiller handle provid
resesistance to movement of the throttle
grip.
This is adjustable for operator preference.
An adjusting screw/knob is located within
the tiller handle.
Resistance
Increase
Decrease
When constant speed is desired, tighten
the adjusting screw/bolt to maintain the
desired throttle setting.
w
Do not overtighten the friction adjusting
screw/ knob.
If there is too much resistance, it may be
difficult to move the throttle grip, which
could result in an accident.
2-8
GB
Knob/Screw
Turn clockwise
Turn counterclockwise
Capítulos
