Operating The Vcr - JVC TH-S3 Manual De Instrucciones

Operating external components with the remote control

Operating the VCR

7 To set the manufacturer's code
1
Slide the remote control mode selector
to VCR.
2
Press and hold
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer's code (2 digits).
Examples:
For a Panasonic VCR:
Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
Manufacturer Code
JVC 01, 02, 03
Emerson 11, 26
Fisher 29
Funai 10, 14-16
Gold Star 12
Hitachi 04
Mitsubishi 13
NEC 25
Panasonic 07, 17
5
Release VCR.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
VCR.
Manufacturer Code
Philips 09
RCA 05, 06
Samsung 24
Sanyo 21-23
Sharp 27, 28
Shintom 30
Sony 18-20
Zenith 08
See page 11 for button locations.
7 Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to operate a VCR;
Set the remote control mode selector to VCR.
The following buttons are available:
VCR:Turns VCR on and off.
3 (play button):Starts playback.
7:Stops operation.
8:Pauses playback.
¡
:Fast forwards video tape.
1:Rewinds video tape.
REC:Press this button together with 3 (play button) to start
recording or together with 8 to pause recording.
CHANNEL +/–:Changes the TV channels on the VCR.
VCR
12