Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOTE:
•
This is a general use remote controller, it could be used for the air conditioners with mul-
tifunction; For some function, which the model doesn't have, if press the corresponding
button on the remote controller that the unit will keep the original running status.
•
After putting through the power, the air conditioner will give out a sound. Operation indi-
cator "
" is ON. After that, you can operate the air conditioner by using remote controller.
•
Under on status, pressing the button on the remote controller, the signal icon "
the display of remote controller will blink once and the air conditioner will give out a "de"
sound, which means the signal has been sent to the air conditioner.
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2
MODE button
Press this button to select your required operation mode.
•
When selecting auto mode, air conditioner will operate automatically according to the sen-
sed temperature. Set temperature can't be adjusted and will not be displayed as well. Press
"FAN" button can adjust fan speed. Press
•
After selecting cool mode, air conditioner will operate under cool mode. Cool indicator
on indoor unit is ON (This indicator is not available for some models).
Press " " or " " button to adjust set temperature. Press "FAN" button to adjust fan speed.
/
Press
button to adjust fan blowing angle.
•
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry
indicator
on indoor unit is ON (This indicator is not available for some models). Under
dry mode, fan speed can't be adjusted. Press
•
When selecting fan mode, the air conditioner will only blow fan, no cooling and no
heating. All indicators are OFF, Operation indicator is ON. Press "FAN" button to adjust fan
speed. Press
AUTO
COOL
DRY
/
button to adjust fan blowing angle.
FAN
HEAT
/
button can adjust fan blowing angle.
/
button to adjust fan blowing angle.
13
" on
GB
Tabla de contenido
