Hama EWS-820 Instrucciones De Uso página 9

• To select the individual values, press the + button (27) or the – button (28) and confirm each selection by
pressing the MODE button (26).
• If you do not make an entry for 20 seconds, you automatically exit setup mode.
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central European
Time in Germany. Make sure you account for the time difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for
the time zone. The clock then automatically sets the time to 3 hours after the DCF signal received or
relative to the manually set time.
Note – Weekday
You can choose from German (GE), English (EN), Danish (DA), Dutch (DU), Italian (IT), Spanish (SP) or
French (FR) for the weekday display.
Celsius / Fahrenheit
• Press the – button (28) to switch between °C and °F for the temperature display.
Alarm
• Repeatedly press the MODE button (26) to access alarm mode 1 or 2.
• A1 or A2 is displayed accordingly in the seconds display.
• Press and hold the MODE button (26) for approx. 3 seconds to set the signal time of the alarm displayed.
The hours display begins to flash.
• Press the + button (27) or the – button (28) to select the hour for the alarm time and confirm your selection
by pressing the MODE button (26). The minutes display begins to flash.
• Repeat the process to set the minutes for the alarm time.
• Press the MODE button (26) repeatedly to also set the other alarm mode or return to the time display (4).
• If you do not make an entry for 20 seconds, you automatically exit setup mode.
Note – Alarm
• When activated, alarm mode 1 only triggers an alarm signal on weekdays (Monday to Friday).
• When activated, alarm mode 2 only triggers an alarm signal on Saturday and Sunday.
• In alarm mode 1 or 2, press the – button (28) to activate/deactivate the corresponding alarm and confirm
your entry by pressing the MODE button (26).
The alarm symbol (6) will appear/not appear.
• If the alarm is triggered, the alarm symbol (6) will begin to flash and an alarm signal will sound.
• Press any button (except the SNOOZE/LIGHT button (25) to stop the alarm. Otherwise, it will stop
automatically after 2 minutes.
• If you press the SNOOZE/LIGHT button (25) during the alarm, the alarm is interrupted for 5 minutes and
then goes off again. The alarm symbol (6) will flash.
8