Product Liability; Safety; Safety Definitions; General Safety Instructions - Husqvarna T 7500 Manual De Usuario

Ocultar thumbs Ver también para T 7500:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Always use approved eye protection.

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

General safety instructions

WARNING: Read the warning instructions
before you use the product.
Always exercise care and use your common sense.
If you get into a situation where you feel unsafe, stop
and seek expert advice. Contact your dealer, service
agent or an experienced user. Do not attempt any
task that you feel unsure of!
Read the operator´s manual carefully and
understand the instructions before using the product.
Save all warnings and instructions for future
reference.
Make sure that you read and understand the
instructions for the main product manual to ensure
that you know what personal equipment to wear,
what safety equipment to use and how to work in a
safe mode.
Keep in mind that it is you, the operator that is
responsible for not exposing people or their property
to accidents or hazards.
The product can be a dangerous tool if used
incorrectly or carelessly, which can cause serious or
fatal injury to the operator or others.
The product must be kept clean. Signs and stickers
must be fully legible.
4
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.

Safety

This product is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge.
Keep children and unauthorized persons away from
the product when in use.
Operators shall be adequately instructed on the use
of the product.
Never use this product if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could affect your vision, alertness,
coordination or judgment.
Do not handle plug or product with wet hands.
Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to instructions in
Maintenance on page 7 .

Electrical Safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
The dust extractor is equipped with a safety thermal
protector to prevent motor from overheating. Should
thermal protector activate, turn off machine, unplug
power cord and check for full dust bag, vacuum hose
clog or filter blockage. It may take up to 45 minutes
for the thermal protector to reset.
Before using the dust extractor make sure that the
power & voltage corresponds with the voltage shown
on the machines rating plate, including extension
cords.
Connect to a properly grounded outlet only. Refer to
Grounding instructions on page 6 .
Improper connection of the equipment-grounding
conductor can result in a risk of electrical shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided, if it will
not fit the outlet have a proper outlet installed by a
qualified electrician.
If using an extension cord make sure the cord rating
is suitable for this machine.
877 - 004 - 07.01.2020
Tabla de contenido
loading

Tabla de contenido