Your Safety Is Important To Us; Areas Of Use - Wella Professionals HAIRSPA ION Manual De Instrucciones

1 Description of appliance and functions
Settings
2

Your safety is important to us

Cosmetic hair treat-
ments
Treatment time
Ambient conditions
Proper use
Specifications
according to the
Machinery Directive
2006/42/EC
Do not leave the
appliance unattended
The variable settings for temperature, development times and ionization provide for
customised treatment, which is rounded off by the use of integrated programmes.
Important safety information
Please read all the safety instructions before use.
2.1

Areas of use

• The appliance is suitable for the following cosmetic hair treatments:
– care (conditioners and pre-treatments for scalp and hair),
– colouring (peroxide treatments, semi-permanent colour treatments
and plant-based haircolours),
– lightening / bleaching (peroxide treatments and bleaching agents).
• The treatment and after-treatment time selected is the responsibility
of the qualified hair salon staff.
• It is extremely important to observe and precisely follow the informa-
tion and safety instructions provided by the manufacturer of the hair
treatment products used with the appliance.
• During operation an ambient temperature of 15°C to 40°C should be
maintained.
• A relative humidity of 95% must not be exceeded.
• Do not set up the appliance in direct sunlight, near high temperatures,
heaters or in damp rooms.
• The appliance is only designed for commercial use indoors.
• The appliance is used for heat treatment of the hair with ionized
steam for a positive effect on the development time and result when
treating hair with cosmetic hair products.
• The appliance must be positioned above the head centred over the
forehead/nape of the neck (see "Section 5.1" page 61).
• Switch off the appliance immediately after use at the ON/OFF switch
c. Remove the power plug f (only pedestal version).
• A-weighted emission sound pressure level in the workplace at 1 m
distance, LpA ≤ 70 dB(A).
• Measured maximum noise level including measurement uncertainty
according to EN ISO 4871. Values determined according to EN 60704-
2-9 with reference to EN 60704-1.
• Under no circumstances should the appliance be left unattended as
long as the power plug f is still inserted (only pedestal version).
1521126, Edition 2012-11, Version 4
47