Tips And Recommendations; Questions On The Lighting Receiver Variation Io; Technical Data - SOMFY Variation io Manual Para El Instalador

9. TIpS AND RECOmmENDATIONS

9.1. Questions on the Lighting receiver Variation io?

Observations
The light does not react at
all when a button on the
control point is pressed

10. TECHNICAL DATA

Radio frequency
Power supply
Operating temperature
Protection rating
Number of programmable io control points
Class
Pollution level
Max. power (B)
Maximum number of Electronic step down voltage converter
connected to a Lighting receiver Variation io.
Control voltage (C)
Maximum permissible load of the control output (C)
Switch type
Dimensions
10
possible cause
The mains power supply is faulty.
The wiring is incorrect.
The batteries in the control point are low.
The control point is not programmed in the
Lighting receiver Variation io.
The control point used is not compatible
with the Lighting receiver Variation io.
Radio interference is impeding operation
of the Somfy io local control point and the
Lighting receiver Variation io.
Check the power supply.
Check the wiring and modify as required.
Replace them with batteries with identical
specifications.
Follow the procedure for adding a Somfy io local
control point.
Check that the control point is an io control point.
Turn off any radio appliances operating nearby.
868-870 MHz io-homecontrol®, two-way, tri-band
L: 91 mm - W: 27 mm - H: 43 mm
© 2013 Somfy SAS. All rights reserved. 09/2013
Solution
230 V ~ 50 Hz
- 20°C to + 60°C
IP 55
9
Class II
1
500W
1
Mini 1V / Max 10V
10 mA