Use; Additional Settings; Adding/Deleting Somfy Io Local Control Points; Setting The «My» Favourite Light Intensity - SOMFY Variation io Manual Para El Instalador

7.

USE

1) To switch on the light:
- Press the Up button.
2) To turn off the light:
- Press the Down button.
3) To immediately switch on at the pre-set «my» favourite light
intensity (default 50%):
- Press the «my» button.
4) To increase the light intensity:
- Press and hold the Up button until the desired light intensity
is reached.
5) To reduce the light intensity:
- Press and hold the Down button until the desired light inten-
sity is reached.
When you reach «night-light» level, hold down the Down
button to turn off the light.

8. ADDITIONAL SETTINGS

8.1. Adding/Deleting Somfy io local control points

A maximum of 9 control points can be programmed
in a Lighting receiver Varaition io.
1) Press the PROG button on the programmed control
point (a) until the light goes on then goes off: the Lighting
receiver Variation io is now in programming mode for 10
minutes.
2) Briefly press the PROG button on the Somfy local io
control point (b) to be added/deleted: the light goes on then
goes off; the io control point is added or deleted.
8
1
2
3
4
5
1
2 sec.
PROg. A
1
2 sec.
PROg. A
© 2013 Somfy SAS. All rights reserved. 09/2013
+
2
0.5 sec.
PROg. B
10 min.
+ +
2
0.5 sec.
PROg. B
10 min.