Technical Data - Stiebel Eltron MINI 2-1 Funcionamiento E Instalación

TECHNICAL DATA

11. Technical data
Part number
Electrical data
Phases
Voltage 1
Wattage
Amperage draw
Min. recommended circuit breaker size
Min. recommended wire size (copper)
3
Connections
Water connection 4
Application limits
Max. permissible pressure
Recommended inlet temperature
Minimum water flow to activate unit
Miscellaneous
Heating element
Nominal mains voltage is 110-120V and 220-240V.
1
2 This is our recommendation for overcurrent protection sized at 100% of load. Check local codes for compliance if necessary.
Tankless water heater are considered a non-continuous load.
3 Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load
For use with cold water supply only
4
WWW.STIEBEL-ELTRON-USA.COM
Mini 2-1 Mini 2.5-1
231045 232098
1 - 50/60 Hz
110-120 V 110-120 V
1.8 kW 2.4 kW
15 A 20 A
2 15 A 20 A
14 AWG 12 AWG
⅜� O.D. flex connector or ⅜� compression fitting
150 psi / 10 bar
41–77 °F (5–25 °C)
0.21 gpm / 0.8 l/m 0.40 gpm / 1.5 l/m 0.4 gpm / 1.5 l/m
Nichrome bare-wire
Mini 3-1 Mini 3.5-1
220816 232099
110-120 V 110-120 V
3.0 kW 3.5 kW
25 A 29 A
25 A 30 A
10 AWG 10 AWG
0.4 gpm / 1.5 l/m
MINI SERIES TANKLESS ELECTRIC WATER HEATERS |
™
Mini 4-2 Mini 6-2
222039 220817
220-240 V 208 V 220-240 V 208 V
3.5 kW 2.6 kW 5.7 kW 4.3 kW
15 A 13 A 24 A 21 A
15 A 25 A
14 AWG 10 AWG
0.40 gpm / 1.5 l/m 0.77 gpm / 2.9 l/m
17