Hot Water Output; Incorrect Use; First Steps To Be Taken In The Event Of Malfunction - Stiebel Eltron MINI 2-1 Funcionamiento E Instalación

OvERvIEW
6.3

Hot water output

Model Wattage at
max rated
voltage
Mini 2-1 1.8 kW
Mini 2.5-1 2.4 kW
Mini 3-1 3.0 kW
Mini 3.5-1 3.5 kW
Mini 4-2 3.5 kW
Mini 6-2 5.7 kW
Mini 2-1 models are internally restricted to 0.32 gpm (1.2 l/
min). Mini 2-1, 2.5-1, 3-1 ship with a 0.5 gpm (1.9 l/min) pressure
compensating flow reducer/aerator that must be installed.
Mini 3.5-1, 4-2 ship with a 0.66 gpm (2.5 l/min) pressure
compensating flow reducer/aerator that must be installed.
12 | MINI SERIES TANKLESS ELECTRIC WATER HEATERS
™
Typical hot water
output
0.32 gpm / 1.2 l/min
0.50 gpm / 1.9 l/min
0.50 gpm / 1.9 l/min
0.66 gpm / 2.5 l/min
0.66 gpm / 2.5 l/min
1.00 gpm / 3.8 l/min
6.4

Incorrect use

The following are not permitted and will void the factory warranty:
- Installation of the appliance where it is at risk
from frost
- Installation in rooms where the appliance is at risk from
explosions as a result of dust, gases or vapors
- Ignoring safety clearances and safety zones
- Incorrect power connection
- Operation of the appliance without water flowing through the
unit, or with air in the lines (See section 8, "Initial start-up",
pg. 16)
- Operation of the unit with the cover off
- Heating liquids other than potable water
6.5 First steps to be taken in the event of
malfunction
WARNING: ALWAYS SHUT OFF POWER AND WATER TO
THE UNIT PRIOR TO REMOVING THE FILTER SCREEN.
FAILURE TO DO SO MAY CAUSE SERIOUS BODILY INJURY OR
DEATH.
» Check the circuit breaker
WWW.STIEBEL-ELTRON-USA.COM