Switching On The Appliance; Disconnecting The Appliance - Bosch KAN Serie Instrucciones De Uso Y Montaje

en
Switching on
the appliance
Switch on the appliance according to
the enclosed operating instructions.
Disconnecting
the appliance
Disconnect the appliance according to
the enclosed operating instructions.
If the appliance is to be disconnected
or stored at temperatures below
freezing point, empty the water tank for
the drinking water dispenser.
Emptying the water tank in
the appliance
S Pull out the mains plug.
S Cut off the water supply to the
appliance.
S Remove the motor compartment
cover from the rear of the appliance.
S Unscrew the connecting cable (1).
S Place a shallow water collecting tray
(capacity approx. 3 litres) under the
connection valve.
S Unscrew, drain and screw back
hose (2) and then hose (3) on the
appliance connection valve.
Important: Do not mix up the hose
connections!
S After draining the water tank, re
attach the motor compartment cover.
Switch on the appliance and then
turn on the tap.
42