Adjusting The Armpad - Vermeiren D400 Manual De Instrucciones

Adjust the angle of the footplates as follow:
1. Loosen bolt .
2. Adjust tube in the desired angle. The angle indication (80° -85 ° -90° -95° -100° ) is
according the dashes
3. Retighten the bolt
3.7

Adjusting the armpad

The armpad of your wheelchair can be adjusted in height and depth. The height of the
armpad can be adjusted in 6 positions (Range 75 mm in steps from 15 mm).
6. Retighten the locking mechanism by turning the star knob
of the armpad.
The depth of the armpad can be adjusted in 3 positions (steps: 42,5 mm).
Depth of the armpad
Front position
Middle position (Standard)
Back position
.
.
Adjust the height and depth of the armpad as
follow:
1. Loosen the locking mechanism slightly by
turning the star knob
2. Pull on the locking pin
3. Move the armpad, to adjust the height of the armpad. Do this at the same time when
pulling on the locking pin
4. Let go of the locking pin
5. Check that the locking pins
securely fixed.
Table 4: Depth of armrest
Page 21
anti-clockwise.
Ⓐ
.
Ⓐ
Ⓐ
.
Ⓐ
Ⓐ
clockwise to reduce the play
Ⓐ
Used holes
Back and middle
Hole 2 and 4
Front and middle
D400
2013-06
.
are