Color Temp - Sony VPL-S800U Manual De Instrucciones

SHIFT
Adjusts the position of the picture.
S H I F T H : 4 8 7 V : 5 1 3
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to the
right, and as the setting decreases, the picture moves to
the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the B or the b key to adjust the horizontal position
and the V or the v key for the vertical position.
H FILTER
Corrects the vertical bands that appear on the picture.
I N P U T - A
D O T P H A S E : 8 0
INPUT
SELECT
S I Z E H : 1 0 9 2 V : 1 6 1
S H I F T H : 4 8 7 V : 5 1 3
PICTURE
CTRL H F I L T E R : O N
V F I L T E R : O F F
INPUT
SETTING C O L O R T E M P : H B M
S C A N C O N V : O F F
SET
SETTING
S I G P R O C E S S
SEL: SET: ENTER RESET: RESET
INPUT
INFO
EXIT: MENU
These vertical bands may occur when an RGB signal
which horizontal resolution is other than 832 or 800
dots is input. In such cases, set to ON. The picture will
loose some clarity, but the vertical bands will be
reduced. Set to OFF to associate a dot of the input
signal with a pixel of the LCD.
V FILTER
Corrects the horizontal bands that appear on the
picture.
I N P U T - A
D O T P H A S E : 8 0
INPUT
SELECT
S I Z E H : 1 0 9 2 V : 1 6 1
S H I F T H : 4 8 7 V : 5 1 3
PICTURE
CTRL H F I L T E R : O N
V F I L T E R : O F F
INPUT
SETTING C O L O R T E M P : H B M
S C A N C O N V : O F F
SET
SETTING
S I G P R O C E S S
SEL: SET: ENTER RESET: RESET
INPUT
INFO
EXIT: MENU
These horizontal bands may occur when an RGB
signal which vertical resolution is other than 624 or
600 dots is input. In such cases, set to ON. The picture
will loose some clarity, but the horizontal bands will
be reduced. Set to OFF to associate a dot of the input
signal with a pixel of the LCD.

COLOR TEMP

Adjusts the color temperature.
I N P U T - A
D O T P H A S E : 8 0
INPUT
SELECT S I Z E H : 1 0 9 2 V : 1 6 1
S H I F T H : 4 8 7 V : 5 1 3
PICTURE
CTRL H F I L T E R : O F F
V F I L T E R : O F F
INPUT
SETTING
C O L O R T E M P : H I G H
S C A N C O N V : O L O W
SET
SETTING S I G P R O C E S S H B M
SEL: SET: ENTER RESET: RESET
INPUT
INFO
EXIT: MENU
HIGH: Makes the white color bluish.
LOW: Makes the white color reddish.
HBM (High Brightness Mode): Reproduces a
picture with high brightness.
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
I N P U T - A
D O T P H A S E : 8 0
INPUT
SELECT S I Z E H : 1 0 9 2 V : 1 6 1
S H I F T H : 4 8 7 V : 5 1 3
PICTURE
CTRL
H F I L T E R : O F F
V F I L T E R : O F F
INPUT
SETTING C O L O R T E M P : H B M
S C A N C O N V : O N
SET
SETTING S I G P R O C E S O F F
SEL: SET: ENTER RESET: RESET
INPUT
INFO
EXIT: MENU
ON: Displays the picture according to the screen size.
The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
SIG PROCESS
Selects the conversion format from the frame format or
field format when the signal is input.
V I D E O
D O T P H A S E
INPUT
SELECT S I Z E H : 1 0 6 4 V : 2 0 0
S H I F T H : 4 9 6 V : 5 1 3
PICTURE
CTRL
H F I L T E R
V F I L T E R
INPUT
SETTING C O L O R T E M P : L O W
S C A N C O N V F R A M E
SET
SETTING S I G P R O C E S S : F I E L D
SEL: SET: ENTER RESET: RESET
INPUT
INFO
EXIT: MENU
FRAME: Selects the frame format. This position is
suitable for a still picture, such as when using a
document camera.
FIELD: Selects the field format. This position is
suitable for a moving picture.
(Continued)
27
(EN)