Dolmar TM-98.14 H2D Manual De Instrucciones página 125

Ocultar thumbs Ver también para TM-98.14 H2D:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

HOW TO USE THE MACHINE
Connect a water hose to each of the pipe
fittings (1) one at a time and run water
through each one for a few minutes, with
the blades moving.
When washing, the cutting deck should
be in the fully lowered position.
Put the machine away in a dry place protected from weather and, if possible,
cover with a cloth (☛ 8.3).
5.4.9 S
TORAGE AND INACTIVITY FOR LONG PERIODS
If the machine is likely to be unused for a long period (more than 1 month), dis-
connect the cables from the battery and follow the instructions in the engine
manual. Lubricate all joints as directed (☛ 6.2.1).
WARNING!
!
collected around the engine or silencer to prevent their catching fire the
next time the machine is used!
Empty the fuel tank by disconnecting the tube situ-
ated at the inlet of the fuel filter (1) and follow the
instructions in the engine manual.
IMPORTANT
cool and dry place. Before a long storage period
(more than 1 month), always charge the battery,
and then recharge before using again ( ☛ 6.2.5).
The next time the machine is used, check that there are no fuel leaks from the
tubes, fuel stopcock or carburettor.
Carefully remove any dry grass cuttings which may have
The battery must be kept in a
1
EN 27
1
Tabla de contenido
loading

Tabla de contenido