En 26 How To Use The Machine - Dolmar TM-98.14 H2D Manual De Instrucciones

Ocultar thumbs Ver también para TM-98.14 H2D:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN 26
the engine by putting the key into the «OFF» position.
When the engine is stopped, close the fuel stopcock
(1) (
if fitted).
WARNING!
!
accelerator in the «SLOW» position for 20 sec-
onds before stopping the engine.
WARNING!
!
unattended!
IMPORTANT
«ON» position when the engine is not running.
5.4.8 C
LEANING AND STORAGE
After each mowing, clean the outside of the machine.
WARNING!
!
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card
located under the dashboard.
IMPORTANT
body and engine!
For washing the inside of the cutting deck the machine must be on firm ground
with:
– the stone-guardin place;
– the operator seated;
– the engine running;
– the transmission in neutral;
– the blades engaged.
To avoid backfire, put the
Always take out the ignition key if leaving the machine
To keep the battery charged, do not leave the key in the
Do not leave containers full of cut grass inside a room.
Never use hose-nozzles or harsh detergents for cleaning the
HOW TO USE THE MACHINE
1
Tabla de contenido
loading

Tabla de contenido