Setting Up The Multi Display - Sony FWD-42PX2 Manual De Instrucciones

Setting up the Multi Display

Setting up the Multi
Display
You can make settings for connecting multiple display
units to form a video wall.
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: Standard
Adjust Picture
Adjust Sound
Select Set
ENTER
2
Select "SCREEN CONTROL" with M/m and
press ENTER.
The SCREEN CONTROL menu appears on the
screen.
SCREEN CONTROL
Multi Display Setup
Wide Setup
Wide Mode: Full
Adjust Screen
Select Set
ENTER
Note
You can enlarge the picture using the Multi Display
only when "Aspect" is set to"Full."
3
Select "Multi Display Setup" with M/m and press
ENTER.
The Multi Display Setup menu appears on the
screen.
SCREEN CONTROL
Multi Display Setup
Multi Display: Off
Position
Select Set
ENTER
34
(GB)
Exit
MENU
Exit
MENU
Exit
MENU
4
Select "Multi Display" with M/m and press
ENTER.
The following menu appears on the screen.
SCREEN CONTROL
Multi Display Setup
Multi Display: Off Off
Position
2x2
3x3
4x4
Select Set ENTER
5
Select the mode corresponding to the arrangement
of the video wall you want to setup with M/m.
Off: Uses a single screen.
2 × 2 – 4 × 4: Selects the arrangement to be used
to construct the video wall.
6
Press ENTER to return to the Multi Display Setup
menu and select "Position" with M/m.
SCREEN CONTROL
Multi Display Setup
Multi Display: 3x3
Position
Select Set
ENTER
7
Select the position of this particular display unit in
the arrangement of the video wall with M/m/</
,.
SCREEN CONTROL
Multi Display Setup
Multi Display: 3x3
Position
Select Set
ENTER
For example, to select the position at the right
bottom in a 3 × 3 arrangement.
8
Press ENTER to set the position.
The menu returns to the Multi Display Setup
menu.
Note
You can set the Multi Display only when the
"PICTURE AND PICTURE" function is disabled.
Exit MENU
Exit
MENU
Exit
MENU