Wlan Internet Access Points - Nokia N97 Manual Del Usuario

Prompt password — If you must enter the
●
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
●
a data connection and is usually provided by your
service provider.
Authentication — Select
●
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message center.
Use access point — Select
●
you want the device to ask for confirmation before
the connection using this access point is created, or
Automatically if you want the device to connect to
the destination using this access point
automatically.
Select Options Advanced settings
>
following:
Network type — Select the internet protocol type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
Secure to always send
Normal to send your
After confirmation if
and from the
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.

WLAN internet access points

Select Menu Settings
>
Destinations Access
>
instructions on the screen.
To edit a wireless LAN (WLAN) access point, open one
of the access point groups and select an access point
marked with .
Follow the instructions from your WLAN service
provider.
Wi-Fi network name
●
Search for networks. If you select an existing
network, WLAN network mode and WLAN security
mode are determined by the settings of its access
point device.
Network status — Define whether the network
●
name is displayed.
Wi-Fi network mode
●
ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same WLAN network name.
— Enter the address of the
— Enter the port number of
and Connectivity
>
point, and follow the
— Select Enter manually
— Select Ad-hoc to create an
or
67