Compass
Select
Menu
> Maps.
Your device has an internal compass. When the
compass is enabled, the circle around the compass is
green, and the map view rotates automatically
according to the direction to which the top of the
device is pointing.
The compass is active by default. To turn off the
compass, select in the Maps main view, select
Options
Tools
>
compass is not in use, the circle around the compass is
white, and the map view does not rotate
automatically. Turning off the compass is only valid for
the current session. When you open Maps the next
time, it will turn on automatically.
Before you can calibrate the compass you should check
the following:
The device sensors are on. Select
●
Settings
Phone
>
Sensors
> On.
GPS connection is active.
●
The map is zoomed into your GPS position.
●
Otherwise the compass icon is not shown.
To calibrate the compass:
Rotate the device around all axes in a continuous
86
movement until the calibration indicator changes its
Turn compass
off. When the
>
Menu
Sensor settings
>
color to green
accuracy of the compass is low. If the indicator is red
, the compass is not calibrated.
Move on a map
Select
Menu
To zoom in to your GPS position or your last known
location, select
When the GPS connection is active,
current location on the map.
>
>
To move on the map, drag the map. The map is
oriented towards north by default.
When you have an active connection and browse the
map on the display, a new map is automatically
downloaded if you scroll to an area which is not
covered by maps already downloaded. The maps are
automatically saved in the device memory or on a
compatible memory card (if inserted).
. If the indicator is yellow
> Maps.
Options
My
position.
>
, the
shows your