Wlan Internet Access Points - Nokia N86 8MP Guia Del Usuario

Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.

WLAN internet access points

Select Menu Tools
> >
Destinations Access
>
instructions on the display. Or, open one of the access
point groups, select an access point marked with
and select Edit.
Use the instructions provided by your service provider
to edit the following:
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode
security mode are determined by the settings of its
access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
an ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is
— Enter the address of the
— Enter the port number of
Settings and Connection
point, and follow the
— Select Enter manually
and WLAN
— Select Ad-hoc to create
not needed. In an ad hoc network, all devices must
use the same WLAN network name.
WLAN security mode
●
used: WEP, 802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network supports
them.
Use access point
●
set the device to ask for confirmation before the
connection using this access point is created or
Automatically to set the device to connect to the
destination using this access point automatically.
>
To enter the settings for the selected security mode,
select WLAN security
,
Advanced WLAN settings
Select Options Advanced settings
>
following:
IPv4 settings — Enter the IP address of your device,
●
or
the subnet IP address, the default gateway, and the
IP addresses of the primary and secondary DNS
servers. Contact your internet service provider for
these addresses.
IPv6 settings — Define the type of DNS address.
●
Ad-hoc channel
●
enter a channel number (1-11) manually, select
defined.
Proxy server address
●
proxy server.
— Select the encryption
(not for ad hoc networks), or
Open network, no
— Select After confirmation
settings.
and from the
(only for ad hoc networks) — To
— Enter the address for the
to
User
153