On the ground
Place the chain saw securely on the
N
ground – assume a steady stance-
the saw chain must not touch any
objects and also must not touch the
ground
With the left hand on handlebar,
N
press the chain saw firmly against
the ground – thumb wrapped
around the handlebar
Step into the rear handle with the
N
right foot or step on the rear hand
guard with the heel of the right foot
MS 461
Between the knees or thighs
Clamp the rear handle between the
N
knees or thighs
Grip the handlebar firmly with the
N
left hand – thumb wrapped around
the handlebar
Starting
With the right hand, pull the starter
N
grip slowly until you feel it engage –
and then give it a brisk strong pull –
simultaneously press down on the
handlebar – do not pull the starter
rope out all the way – risk of
breakage! Do not let the starter grip
snap back – guide it vertically back
into the housing so that the starter
rope can rewind properly
With a new engine or after a long period
of disuse, with machines without an
additional manual fuel pump, it may be
necessary to pull the starter rope several
times – to prime the fuel line.
English
33