Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Before doing any maintenance in the machine switch it OFF and
3. Operation
3.1 Starting
The Blender is activated by turning the On/Off Switch # 03
(Pic.01) to ON position.
3.2 Operating Procedures
The High Performance Tilting Blender works at high speed
(approximately 3.500 rpm) To feed it proceed as follows:
1 – Remove the Lid # 01 (Pic.01).
2 – Put product inside the Cup # 02 (Pic.01) with the machine switched
OFF.
3 – Place the Lid # 01 (Pic.01) back on top of the Cup and switch the
machine ON.
Due to turbulence generated when machine is ON do not turn it ON
without the Lid # 01 (Pic.01). The processing time depends on the
kind of product.
IMPORTANT
NEVER SWITCH THE MACHINE ON WITHOUT LOAD IN IT
BECAUSE IT WILL CAUSE IRREPARABLE DAMAGES.
IMPORTANT
It is not recommended to blend products without the addition of
any liquid, otherwise it will overheat and damage the Cup seal.
IMPORTANT
unplug it.
NOTE
04
Tabla de contenido
